Given the fact that a technical productdatasheet gives merely a static image , we would also like to give you a clearer view on the application possibilities via our realized projects. You will notice that our solutions are operative in numerous sectors and for a variety of projects. Couldn’t find a project similar to yours? Don’t hesitate to contact us and we will certainly be able to work out a solution for you.
To keep the entrance of this private residence accessible during winter time, we installed 4 heated drive lanes.
At a doctors private practice, the driveway has been traced with ramp heating
4 drive lanes had to be placed on the ramp for 3 parking levels.
Ramp heating projects are always calculated according to the technical aspects of the project and the specific needs of the customer
For this driveway we worked with 2 heated lanes. 5,2kW per lane has been installed.
For a waste management company we have equipped the driveway towards the weighbridge with MI heating cable.
Heat tracing of a bunker with the purpose of keeping it frost-free.
In order to keep the stairways of subways frost free, our customer installed electrical heating cables.
To keep the connection in slope between the parking and hospital entrance snow- and ice free, the DIRAC Industries outdoor floor heating system was selected.
When a project was started to renew the existing driveway, there was also decided to keep it snow- and icefree by means of electrical outdoor floorheating.
Tracing of pipelines in a cogeneration plant. The pipelines have to be kept frost-free and the cable must be able to withstand temperatures of more than 450°C.
Heating of the ramp of a parking garage on the town square of Sint-Niklaas. To prevent cars from slipping down the slope in wintertime, this ramp has been heat-traced.
The mineral insulated heating cable is fixed with straps and covered with aluminium for a good dissipation of the heat and a good support of the insulation.
To prevent cars from slipping down the ramps of this parking garage, we used SiPCP heating cable which was attaced to chicken wire and the casted in the concreet ramp.
For a producer of insulating material, there was a need for heating in his production process to optimize the attachment process of a foil to the insulation.
In the production of biodiesel, the temperature of the pipes and the reactor must be carefully controlled.
DIRAC Industries also specializes in detecting and repairing defect driveway heating systems. This is done by means of IR thermography.
To sterilize medical waste, this transport system has been equiped with electrical heating.
To sterilize collected biological contaminated hospital waste, a sterilization tank is used.
For the tracing of pipelines in ATEX T4 zone, we have installed selfregulating heating cable SRME.
For the tracing on a pipeline between storage tanks in the « Botlek », we applied 6 km of SFM constant wattage cable.
The project involves the keeping warm of a boiler installation in an incinerator. The system operates at 220°C. All parts are held at 120°C minimum.
For the compensation of thermal bridges in a large-scale renovation project, we applied self-regulating heating cable.
A duct that has to be kept on a temeprature of 100°C is here heated with silicone heating mats, similar to those used in the tankcontainer sector.
In the petrochemical industry, MI cable is used in ATEX zone T1 (450°C) to compensate heat losses on piping.
For a customer in the pharmaceutical sector, we installed tracing with plug connections. The installation can easily be dismounted.
To keep the piping on a platform in the North Sea free of frost, we installed selfregulating tracing ribbon.
In order to keep the walk way to an ATM of a bank free from snow and ice, we applied heating cables in a dry-concrete bed under the concrete clincker.
In order to keep aluminum plates from a laboratory installation at a temperature of 50°C, we used 8 silicone mats.
A manufacture of musli bars needed to warm up syrup to a certain temperature. The original heating in the drum was functional for 10 years before falling out. Buying of a new drum was very expensive, so he chose to repair the original one.
To protect plants sensitive to frost, these mats are placed under the roots inside planters.